We can Read Microcontroller TS80C54X2 Flash, please view the Microcontroller TS80C54X2 features for your reference:

TS80C54/58X2 is high performance CMOS ROM, OTP and EPROM versions of the 80C51 CMOS single chip 8-bit microcontroller. The TS80C54/58X2 retains all features of the Atmel Wireless & Microcontrollers 80C51 with extended ROM/EPROM capacity (16/32 Kbytes), 256 bytes of internal RAM, a 6-source , 4-level interrupt system, an on-chip oscilator and three timer/counters when Read Microcontroller.

In addition, the TS80C54/58X2 has a Hardware Watchdog Timer, a more versatile serial channel that facilitates multiprocessor communication (EUART) and a X2 speed improvement mechanism if Read Microcontroller.

The fully static design of the TS80C54/58X2 allows to reduce system power consumption by bringing the clock frequency down to any value, even DC, without loss of data before Read Microcontroller.

The TS80C54/58X2 has 2 software-selectable modes of reduced activity for further reduction in power consumption. In the idle mode the CPU is frozen while the timers, the serial port and the interrupt system are still operating. In the power-down mode the RAM is saved and all other functions are inoperative after Read Microcontroller.

80C52 Compatible

• 8051 pin and instruction compatible when Read Microcontroller
• Four 8-bit I/O ports
• Three 16-bit timer/counters
• 256 bytes scratchpad RAM

High-Speed Architecture

• 40 MHz @ 5V, 30MHz @ 3V
• X2 Speed Improvement capability (6 clocks/machine cycle)

30 MHz @ 5V, 20 MHz @ 3V (Equivalent to 60 MHz @ 5V, 40 MHz @ 3V)

Dual Data Pointer if Read Microcontroller

On-chip ROM/EPROM (16K-bytes, 32K-bytes)

Programmable Clock Out and Up/Down Timer/

Counter 2

Hardware Watchdog Timer (One-time enabled with Reset-Out)

Asynchronous port reset

Interrupt Structure with

• 6 Interrupt sources
• 4 level priority interrupt system

Full duplex Enhanced UART before Read Microcontroller

• Framing error detection
• Automatic address recognition

Low EMI (inhibit ALE)

Power Control modes

• Idle mode
• Power-down mode
• Power-off Flag

Once mode (On-chip Emulation)

Power supply: 4.5-5.5V, 2.7-5.5V

Temperature ranges: Commercial (0 to 70oC) and

Industrial (-40 to 85oC)

Packages: PDIL40, PLCC44, VQFP44 1.4, PQFP44 after Read Microcontroller

F1, CQPJ44 (window), CDIL40 (window)