Microchip PIC24FJ32GP202 MCU Flash Memory Firmware Extraction

Modified Harvard Architecture
64 Kbytes of Flash Memory
8 Kbytes of SRAM
Up to 16 MIPS Operation @ 32 MHz
8 MHz Fast RC (FRC) Internal Oscillator:
- 96 MHz PLL option
- Multiple clock divide options
- Fast start-up
17-Bit x 17-Bit Single-Cycle Hardware Fractional/Integer Multiplier
32-Bit by 16-Bit Hardware Divider
16-Bit x 16-Bit Working Register Array
C Compiler Optimized Instruction Set Architecture
Two Address Generation Units (AGUs) for Separate Read and Write Addressing of Data Memory when copying pic16f1454 mcu flash memory content;

USB 0 On-The-Go (OTG)
Dual Role Capable – Can Act as either Host or Device
Low-Speed (1.5 Mb/s) and Full-Speed (12 Mb/s) USB Operation in Host mode
Full-Speed USB Operation in Device mode
High-Precision PLL for USB
USB Device mode Operation from FRC Oscillator – No Crystal Oscillator Required
Supports Up to 32 Endpoints (16 bidirectional):
- USB module can use any RAM location on the device as USB endpoint buffers
On-Chip USB Transceiver with Interface for Off-Chip USB Transceiver
Supports Control, Interrupt, Isochronous and Bulk Transfers to crack pic16f1519 microchip protective memory
On-Chip Pull-up and Pull-Down Resistors