ARM7 Microcontroller STM32F107VCT7 Flash Memory Data Cloning refers to break mcu fuse bit by focus ion beam and recover embedded firmware from stm32f107vct7 microprocessor;
Output driving current
The GPIOs (general purpose input/outputs) can sink or source up to +/-8 mA, and sink
+20 mA (with a relaxed VOL).
and the sum of IIO (I/O ports and control pins) must not exceed IVSS.
The IIO current sourced by the device must always respect the absolute maximum rating specified in
Table 7 and the sum of IIO (I/O ports and control pins) must not exceed IVDD.
Based on characterization data, not tested in production.
In the user application, the number of I/O pins which can drive current must be limited to respect the absolute maximum rating specified in Section 5.2:
- The sum of the currents sourced by all the I/Os on VDD, plus the maximum Run consumption of the MCU sourced on VDD, cannot exceed the absolute maximum rating IVDD (see Table 7).
- The sum of the currents sunk by all the I/Os on VSS plus the maximum Run consumption of the MCU sunk on VSS cannot exceed the absolute maximum rating IVSS (see Table 7).
Output voltage levels
Unless otherwise specified, the parameters given in Table 36 are derived from tests performed under ambient temperature and VDD supply voltage conditions summarized to replicate microprocessor stm32f105rct6 flash memory binary. All I/Os are CMOS and TTL compliant.