Copy TMS320F28026 Microcontroller Flash Memory Program and rewrite the binary to new MCU TMS320F28026, the original microcontroller tms320f28026 protection over memory will be attack and clone the software data to new microprocessor tms320f28026 memory;

The F2809 contains 128K x 16 of embedded flash memory, segregated into eight 16K x 16 sectors. The F2808 contains 64K x 16 of embedded flash memory, segregated into four 16K x 16 sectors.

The F2806 and F2802 have 32K x 16 of embedded flash, segregated into four 8K x 16 sectors. The F2801 device contains 16K x 16 of embedded flash, segregated into four 4K x 16 sectors.

All five devices also contain a single 1K x 16 of OTP memory at address range 0x3D 7800 – 0x3D 7BFF. The user can individually  erase, program, and validate a flash sector while leaving other sectors untouched when readout embedded binary from tms320f28015 mcu flash memory. However, it is not possible to use one sector of the flash or the OTP to execute flash algorithms that erase/program other sectors.

Special memory pipelining is provided to enable the flash module to achieve higher performance. The flash/OTP is mapped to both program and data space; therefore, it can be used to execute code or store data information. Note that addresses 0x3F7FF0 – 0x3F7FF5 are reserved for data variables and should not contain program code only after mcu tms320f28016 flash firmware being extracted.