Readout Texas Instrument TMS320F28026 Processor Memory Program starts from attack tms320f28026 dsp mcu’s protective system and then clone the software data to new microcontroller tms320f28026;
The F2809 contains 128K x 16 of embedded flash memory, segregated into eight 16K x 16 sectors. The F2808 contains 64K x 16 of embedded flash memory, segregated into four 16K x 16 sectors.
The F2806 and F2802 have 32K x 16 of embedded flash, segregated into four 8K x 16 sectors. The F2801 device contains 16K x 16 of embedded flash, segregated into four 4K x 16 sectors.
All five devices also contain a single 1K x 16 of OTP memory at address range 0x3D 7800 – 0x3D 7BFF. The user can individually erase, program, and validate a flash sector while leaving other sectors untouched especially in the process of readout tms320f28015 binary file from its flash memory. However, it is not possible to use one sector of the flash or the OTP to execute flash algorithms that erase/program other sectors.
Special memory pipelining is provided to enable the flash module to achieve higher performance. The flash/OTP is mapped to both program and data space; therefore, it can be used to execute code or store data information after extract tms320f28016 mcu firmware. Note that addresses 0x3F7FF0 – 0x3F7FF5 are reserved for data variables and should not contain program code.
